KCLUG

kclug@kclug.org

3239 discussions

RE: old hardware reminisces support group
by Leonard, Phil 18 Jan '05

18 Jan '05

>> Anyone say "shall we play a game" >Well then you must have been using an Altair PC. They really flubbed >that free bit of advertising. Was that an Altair or an IMSAI? Philip

1 0

Re: sbc dsl and linksys firewall config issues
by hanasaki 18 Jan '05

18 Jan '05

What would make double NAT fail? fyi: works in my home just fine though two Linux iptables setups for something I was playing with. Then again NAT on Linux may be better than that in a hardware firewall? Hmmm what's the association with the MTU setting? And just where is this set in the dsl modem and in windows? "just works" with Linux... too bad this system isn't fully under my control to do "right". How do you find the "right" MTU setting?

4 5

Re: old hardware reminiscers support group
by lerninlinux＠comcast.net 18 Jan '05

18 Jan '05

A friend of mine who worked for AT&T had one of those! First time I got to see Unix as my father didn't get to buy everything he wanted. He worked for IBM and won a suggestion award that paid for a Furnace, air conditioner and his XT with a 10mb hard drive. He said he wanted a second hard drive (for Minux) and a cga moniter. How much farther ahead would I be if I'd picked up on more Unix and Minux, rather than toying with the speech synthesis! Anyone say "shall we play a game" Thanks for the memories > i was very happy with my texas instruments personal computer > > http://www.web8bits.com/Marcas/Texas_Instruments/English/TIPC.html > > I even wrote a Tetris for it in Scheme > it was sold in a garage sale, I wonder where it is now. > > On Fri, 14 Jan 2005 09:40:57 -0600, Brian Densmore > <DensmoreB(a)ctbsonline.com> wrote: > > 10.77 MHz 100% IBM PC XT clone > > with 20MG MFM Harddrive > > > _______________________________________________ > Kclug mailing list > Kclug(a)kclug.org > http://kclug.org/mailman/listinfo/kclug

1 0

RE: Open Office quirks
by Brian Densmore 17 Jan '05

17 Jan '05

> -----Original Message----- > From: Jason Clinton [mailto:me@jasonclinton.com] > Sent: Monday, January 17, 2005 11:38 AM > To: kclug(a)kclug.org > Subject: Re: Open Office quirks > > > On Monday 17 January 2005 11:00 am, Brian Densmore wrote: > > I've written my family tree in Open office. Some pages are > title pages; > > centered text, single column. Some pages are family data > pages; two column > > text. I have come across some strange behavior in OO, that > I can't seem > > to get rid of. > > Just a guess but it sounds like you are describing the > behavior of a document > that has even-odd page formatting. Also check to see if > perhaps section > breaks are being inserted instead of page breaks. I thought that might be the case after reading some bug reports on OO's website. But I'm not doing even-odd (right-left) pages. One thing I do notice is that some pages are page style first page, others are default. In online layout mode, I have two pages instead of 109. If I open up print preview and then close I suddenly get 117 pages! The extra 8 pages being the ones that I can delete and have them magically reappear. How do I determine if I have a page break as opposed to a section break? Also some pages with tables don't allow me to alter the page. Now you must realize, I did nothing special in creating this document. Everything was using the defaults of OO.

2 1

Open Office quirks
by Brian Densmore 17 Jan '05

17 Jan '05

I've written my family tree in Open office. Some pages are title pages; centered text, single column. Some pages are family data pages; two column text. I have come across some strange behavior in OO, that I can't seem to get rid of. If I add a page and copy and paste data from another page, sometimes it adds an extra blank page. If I get rid of that page the new page with the pasted data becomes part of the previous existing page. A double ctrl-enter then adds a blank page and puts the new data on it's own page. If I then hit the delete once, then it appears to be fixed. But it's not really. If I save and close, the blank page comes back. Anyone else have issues like this with OO. I know this is probably something to post in a bug report. Also, any one but more than one textbox on a page? I'd like to have two textboxes on the data pages; one with two columns and one with one column. Brian Densmore

2 2

Solar Cells
by Jonathan Hutchins 17 Jan '05

17 Jan '05

There's been some talk about independent power generation here lately, so I thought some of you would be interested in this: http://www.reuters.com/newsArticle.jhtml?type=scienceNews&storyID=7319094&s… New solar cells that are 5x more efficient than the current 6%. I should point out that there are a LOT of resources on alternative power on the web. Don't rely on this list unless your interest is purely casual.

3 2

VNCserver XDM on Startup?
by Jon Moss 17 Jan '05

17 Jan '05

I've done a few quick searches via Google but not finding what I'm looking for. I have Fedora Core 3 and would like to have VNCserver autoload on startup and give me a login screen when I attach remotely via SSH tunnel. Is this possible? Can someone point me to a howto or other similar documentation? -- Thanks very much, Jon Moss jon.moss(a)cnonline.net

3 3

RE: best eye candy for Linux
by Brian Kelsay 17 Jan '05

17 Jan '05

I agree with you Brian, with one exception. Enlightenment is the best looking out of the box if you like it. I don't. Never have. I never saw the what the big deal was other than the transparent windows, which they seemed to be the first at. For me, one word always described E, yuck. I'm not a big theme hound, I switch them around every once in a while and end up back at default with just a change of wallpaper. Most of the time even that is covered up and so it's not a big deal for me. I go for functionality. To each his own, but KDE has always been fine for me on a full desktop and fluxbox or Windowmaker on a minimal machine. I even used XFCE for a while. Make it work first, then make it pretty. They can all be reconfigured to the point that their mama wouldn't recognize them, so take a chance, open up that GUI control panel and go wild. Brian Kelsay

6 6

cisco firewall pix 501 for vpn help need
by Joe Cho 17 Jan '05

17 Jan '05

Hi, All I emailed from my email server 192.168.1.3 earlier today, but I can't open my email from email server obviously at this time. So, I decided to email again about the one I previously emailed today. So that I can receive some respond. Here's the situation that I have. I set up windows 2003 server with web server. I have a Road Runner/Time Warner with a static ip address 67.53.24.194, subnet 255.255.255.252 and gateway 67.53.24.193, dns 24.94.165.25 and 24.94.165.34 I can access outside internet from this computer 192.168.1.3, not 192.168.1.5 which is my laptop. I have a cisco 900 /Zytel 900 series router first from outside and I attached this Cisco PIX 501 to the router and two computer is plugged in at the back of cisco PIX ethernet port directly. one is 192.168.1.3 and one 192.168.1.5 Interestingly, I can access internet outside world from 192.168.1.3, but not 192.168.1.5. and furthermore I can't access each machine either. Here's configuration I create on Cisco PIX. I think there is a problem on Routing configuration. PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password lkY8/MxVswr1hfSN encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname ROM domain-name jcho.net fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names access-list outside_access_in permit tcp any host 67.53.24.194 eq smtp access-list outside_access_in permit tcp any host 67.53.24.194 eq www access-list outside_access_in permit udp any host 67.53.24.194 eq domain access-list outside_access_in permit udp any host 67.53.24.194 eq 23 access-list outside_access_in permit udp any host 67.53.24.194 eq 21 pager lines 24 icmp permit any echo-reply outside mtu outside 1500 mtu inside 1500 ip address outside 67.53.24.194 255.255.255.252 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm pdm location 192.168.1.3 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 192.168.1.0 255.255.255.0 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) 67.53.24.194 192.168.1.3 netmask 255.255.255.255 0 0 access-group outside_access_in in interface outside rip outside default version 2 rip inside passive version 2 rip inside default version 2 route outside 0.0.0.0 0.0.0.0 67.53.24.193 1 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd address 192.168.1.100-192.168.1.200 inside dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside terminal width 80 Cryptochecksum:3ad4cd7df854fa61449965b6dade27c6 : end ROM# Anyone can help me Please?? I appreciate your genuine support. Joseph Sheperd ksjoecho(a)yahoo.com Joe Cho ksjoecho(a)yahoo.com I like the dreams of the future better than the history of the past. --Thomas Jefferson __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

sbc dsl and linksys firewall config issues
by hanasaki 16 Jan '05

16 Jan '05

anyone done a setup with this? = scenario 1 = linksys to the dsl modem with the modem doing the ppoe auth. modem gets an IP from dsl linksys gets an IP from modem pc gets an IP linksys can not get from the pc to the Internet = scenario 2 = linksys to the dsl modem with the modem being a bridge linksys doing the ppoe auth. linksys ppoe auth works and linksys gets an IP from dsl pc gets an IP linksys browse most sites ok but seems to be slow to connect seems to be lower bandwidth some sites (hotmail/ebay) timeout same sites work if accessed as in scenario 1

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG