KCLUG

kclug@kclug.org

3239 discussions

Remote access partition and install Linux. With a Near Zero skilled operator at the remote site.
by Oren Beck 23 Jan '08

23 Jan '08

The reasons for this situation are several at more than one location. The overview is to remotely install Linux on computers owned by non tool users, zero skills presumed of them. What I am seeking is several methods for making the process just plain work. Initial customer is my mother in Berkeley, and her social groups may join in. The minimal cold start scene will be a Knoppix or Damn small tested computer and net connection. The defined factors are: DSL or cable modem set up as DHCP. Hardware approx 2000 or newer. Working OS of XP or installed Knoppix or both.in most cases. Very Few sites with no OS. Internal HD swaps are a non starter as most of these folks are non tool using mundanes. The rest of the story is they almost all are politically or socially desiring to use Linux.by choice! With a few skeptics that "want to be shown"-more about the net than Linux as they still use TYPEWRITERS! And they often have little to no computer skills to unlearn. Short of my doing some major frequent flier miles tripping,KCLUG may be their salvation. "Someone is going to do it- why not us?" -- Oren Beck 816.729.3645

5 4

Cisco 3750 Switch
by Kelly McLaughlin 23 Jan '08

23 Jan '08

I know we have some great minds in this group. I have a question for a network guru. When creating VLANs in a Cisco 3750 switch, can a single interface port belong to more than one VLAN ?? Thanks in advance for any responses :) . Kelly McLaughlin Tech Support Mokan Dial Inc. Louisburg, Ks. 913-837-2219 Ext. 16 No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.9/1237 - Release Date: 1/22/2008 11:04 AM

2 1

Re: Quick GUI frontend development for command line tools?
by Leo Mauler 22 Jan '08

22 Jan '08

--- "Monty J. Harder" <mjharder(a)gmail.com> wrote: > On Jan 20, 2008 8:25 AM, Leo Mauler > <webgiant(a)yahoo.com> wrote: > > > Interesting, I hadn't thought of a tool which > > created the command line text for you to > > cut-and-paste into a window, but it is a good > > idea. I suppose it is roughly what I had in > > mind in the first place, as all I envisioned > > was a GUI which stepped in, made selecting > > command line program options easier, and then > > ran the complete command line command as the > > GUI exited itself. > > There's nothing about what you just said that > requires a GUI. ChUI works > well, too. (Isn't that right, Hal?) > > The program could be written to run in a > character-mode environment, so that it would > run equally well in an xterm. Maybe even > better, if it were mouse-aware. An additional > feature that could be really helpful is to save > the command in a small script in the user's > home directory, whence it could easily be > re-used. Personally I just want something which prevents the need to look up the command line options every time I want to try something different. That would suffice for mencoder and transcode. However, the GUI was to be for my friend with his interest in Astrolog. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

1 0

Quick GUI frontend development for command line tools?
by Leo Mauler 20 Jan '08

20 Jan '08

There are a few command line applications for which I would like to have a GUI, or for which I've found a GUI I'm just not happy with. I use mencoder and transcode a bit but I'm not happy with the GUI frontends I've found for those applications. I also have a friend who is interested in the Astrolog astrology application but who is very unhappy with the command line interface, a potential Linux convert if a GUI can be discovered. KAstrolog has been out of development for so long I can't seem to compile the thing. I haven't written any code in ten years so I'm looking for something to create GUI Frontends without too much programming experience. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

6 7

Let's start the count down
by James Sissel 17 Jan '08

17 Jan '08

Move over Global Warming! The next scare ... Y2K38. We all better start building our bunkers now. ;) http://en.wikipedia.org/wiki/Year_2038_problem

8 8

RE: Let's start the count down
by James R. Sissel 17 Jan '08

17 Jan '08

<snip> "Ugh, did this show up on Digg or something? This has been known for years, but this is the second time in as many days I've seen someone get panicked about it." </snip> Gosh, I better not remind the group that the Sun will burn out in a few million years. It will probably become a red giant and swallow the Earth before it collapses. We better start building our REALLY GOOD bunkers now! ;) <- notice the winky face???

4 3

Re: KDE 4.0 Gallery
by Arthur Pemberton 17 Jan '08

17 Jan '08

On Jan 14, 2008 9:23 PM, Oren Beck <orenbeck(a)gmail.com> wrote: > > > > > On Jan 14, 2008 5:50 PM, Arthur Pemberton <pemboa(a)gmail.com> wrote: > > > > > > > > > > On 1/14/08, Julie <betelgeuse67stang(a)yahoo.com> wrote: > > > Here's a look if you haven't already seen it: > > > > > > http://content.zdnet.com/2346-9595_22-183063.html > > > > > > As a reminder the KDE 4 look is far from complete. > > > > > > > > > > -- > > Fedora 7 : sipping some of that moonshine > > ( www.pembo13.com ) > > _ > > The "Look and Feel" factors have come to overshadow all else. Often in some > cases literally pushing system resource demands way out of proportion. > Anyone care to name their bloatware examples? I will state that the window > managers of light footprint tend to have an amusing fraction of resource > usage compared to KDE or others. All reports are that KDE4 is lighter than KDE3. I wouldn't consider KDE bloatware myself, but I guess that is subjective. -- Fedora 7 : sipping some of that moonshine ( www.pembo13.com )

5 14

Parts to dump, some free, some cheap
by cragos＠gmail.com 16 Jan '08

16 Jan '08

http://kansascity.craigslist.org/sys/541489377.html Somebody please come take this stuff off my hands. I'm moving on Friday to DC, and this stuff will just collect dust in storage for years if I can't get it into better hands. Please? Thanks, Sean Crago 816-661-9680 Text of the Craigslist post: Case, nice power supply, spare power supply, brand new case, athlon xp motherboard, 1gb of ram, athlon xp mobile 2400-2600 proc, Nvidia GeForce 7500 series video card. - $150 all together iMac DV - $75 sans hdd Working 2-3 year old HP printer - $20 or free with either of the above Free: P3 without hdd, with modem, with floppy, cdburner, network card - works just fine Kitchen table Adult-sized huffy road bike Problem is that I move on Friday. Please, please move quickly here. Otherwise this stuff gets dumped in storage for a year and does noone any good. 816-661-9680

1 0

Boot
by Michael Morgan 16 Jan '08

16 Jan '08

My Mac won't boot. I get the flashing question mark. Does anyone know Mike Needham's or Gary Dickman's telephone number. Thanks:) Michael Morgan Internet Media Specialist 3801 Tracy Avenue KCMO 64109 816.561.2006

3 3

Today's NUI Meeting postponed
by Alex Monteiro 16 Jan '08

16 Jan '08

Due to some unforeseen circumstances, we have to postpone today's NUI meeting scheduled to be held at Olathe Medical. Notification and information on the make-up meeting will be sent out shortly. The Intl. community has been notified and their flights have already been re-routed. Thanks, Alex -- Alex Monteiro Business Development Manager KIS Computer Center - Kansas City o. 816-373-9900 (vmail ext. 7554) f. 816-373-9912 m. 650-279-1909 www.kiscc.com - alexm(a)kiscc.com

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG