KCLUG

kclug@kclug.org

3239 discussions

Wacom Bamboo Tablet
by Jim Herrmann 01 Jan '09

01 Jan '09

I got my daughter a Wacom Bamboo tablet for Christmas. It works, and we figured out how to get pressure sensitivity working in GIMP, so it's fairly useful. However, the eraser doesn't seem to work, and there are also extra buttons on the Bamboo that don't seem to do anything in linux. The configuration information on the intertubes seems to be obsolete, like 2005ish. X is no longer configured with etc/X11/xorg.conf apparently. This is on Ubuntu 8.10. Does anyone have a Bamboo tablet and have everything working? I'd appreciate any input. Thanks, Jim -- - That One - http://www.youtube.com/watch?v=rCUOHKznUyI

3 2

Re: Re: Wacom Bamboo Tablet
by jdpruente＠gmail.com 31 Dec '08

31 Dec '08

I concur. I had to do so to get the video on an old Armada 7800 working with X on 8.xx Ubuntu. Jon. On Dec 31, 2008 2:23pm, Arthur Pemberton <pemboa(a)gmail.com> wrote: > On Wed, Dec 31, 2008 at 1:59 PM, Jim Herrmann kclug(a)itdepends.com> wrote: > > > I got my daughter a Wacom Bamboo tablet for Christmas. It works, and we > > > figured out how to get pressure sensitivity working in GIMP, so it's fairly > > > useful. However, the eraser doesn't seem to work, and there are also extra > > > buttons on the Bamboo that don't seem to do anything in linux. The > > > configuration information on the intertubes seems to be obsolete, like > > > 2005ish. X is no longer configured with etc/X11/xorg.conf apparently. This > > > is on Ubuntu 8.10. > > > > > > X still uses /etc/X11/xorg.conf, but most distros rely on X's > > autoamgic to guess config, but if you put in a valid xorg.conf, it > > should respect it. > > > > > > -- > > Fedora 9 : sulphur is good for the skin > > ( www.pembo13.com ) > > _______________________________________________ > > Kclug mailing list > > Kclug(a)kclug.org > > http://kclug.org/mailman/listinfo/kclug >

1 0

LetMeGoogleThatForYou available via github
by Billy Crook 30 Dec '08

30 Dec '08

Jonathan Otsuka sent me a link to the amusing site http://letmegooglethatforyou.com/ a while back. Well, today I saw it was available on github. See: http://github.com/coderifous/lmgtfy/tree/master Run: git clone git://github.com/coderifous/lmgtfy.git A couple dependencies and Apache config's later, and voila: http://lmgtfy.bcrook.com

1 0

Three Cheers for Rolling Hills Consolidated Library System!!!
by gary hildebrand 28 Dec '08

28 Dec '08

I'm sitting here at the Belt branch of the library, on the net, and just happened to see the ubiquitous footprint of Gnome on the browser. I wondered why it didn't behave like IE . . . Wish more public institutions used Linux . . . sorry Billy Gates . . . . Gary HIldebrand St. Joseph, MO

1 0

Twitter
by Joe Holloway 27 Dec '08

27 Dec '08

Hi, I'm new to the mailing list. Anyone else use Twitter? I'm looking for some KC area Linux users to follow. Perhaps kclug having its own Twitter account would make it easier to find others? http://twitter.com/jholloway7 Take care

4 4

Re: How to remove unused configs from kernel?
by Sean Crago 26 Dec '08

26 Dec '08

Thu, 25 Dec 2008 09:18:10 -0600 (CST) Duane Attaway <dattaway(a)dattaway.net> wrote: >I ran Steven Rostedt's streamline.pl script to remove unloaded modules >from the current .config.......Is there an easy way to detect unused kernel >code from the running kernel and de-config it? Actually, the question is "is there value in such an exercise on modern equipment?" I'm not sure that there isn't, but I'm far from certain that there is. I can see this dramatically cutting down build time (relevant maybe once ever 2-3 weeks), and I can see this having a substantial impact on embedded equipment (only really relevant on the first build), but neither of those things really effects what one does on a day to day basis. Given modern equipment, is there a substantial benefit to jumping through all of these extra hoops to optimize a kernel? On a related note, are there any substantial and significant reasons not to just run stock kernels at this point?

2 1

Core2 Motherboard for sale
by Jonathan Hutchins 25 Dec '08

25 Dec '08

I have a Gibabyte EP43-DSL3 motherboard for sale. Dual Channel DDR2 (1200) 4 Slots, FSB 800-1600MHz, Intel P43 Chipset, PCI Espress 16 slot (Graphics), 4 PCI Ex1 slots, 2 PCI Slots, 6 SATA, 1 IDE, 12 USB, Realtec ALC888 audio w/S/PDIF I/O & 5.1 Speaker Jacks, Realtec 8111C Network 10/100/1000. Supports Core2 duo & quad. Probably has other cool stuff, you can check it out on the web. The chipset was too new for any of the Linux installers I had (early 2008 releases), but is probably supported by late 2008/pre-2009 releases. I fell back to the previous model board and it works fine under Debian Etch. (XP & Vista supported, of course.) Paid $119.99 @ Micro Center earlier this year, will take $80. Best to contact me off-list as the list is filtered.

1 0

How to remove unused configs from kernel?
by Duane Attaway 25 Dec '08

25 Dec '08

I ran Steven Rostedt's streamline.pl script to remove unloaded modules from the current .config. It removed over 300 unused modules from having to be compiled, saving much space and time: http://rostedt.homelinux.com/code/streamline_config.pl.txt But much more can be done. Is there an easy way to detect unused kernel code from the running kernel and de-config it? I'm sure there's a lot of bloat in my kernel that never gets executed. -=Duane http://www.dattaway.net

1 0

Merry Christmas -- for some
by gary hildebrand 25 Dec '08

25 Dec '08

Gentlemen: After having my home repossessed (like many other Americans), I ended up for two weeks at the Restart shelter in E downtown KC. The experience there . . . well I can only describe it this way: If I were a survivor of the Holocaust, I wouldn't wish it on the Nezis. I've spent the last 6 weeks at the Salvation Army shelter in St. Joseph, and was ordered to leave today just after lunch. Why? Simple respect, and the lack thereof. Remember this story when you see the bellringers over their kettles -- some of their fold don't understand and practice what they claim. I wish all of you LUG nuts and others who aren't afraid to walk a different walk than the rest of the US a glorious and wonderful Christmas and New Year's holiday. I ask that you keep in mind that many aren't as well off as us, and instead of giving them a handout, a hand up would be appreciated, even if it seems small and inconsequential. And happy Channukah, and Merry Kwanza to those who have slightly different beliefs. May next year be brighter than this year. Gary Hildebrand [homeless] St. Joseph, MO

2 1

Hello, I’m PC and I’m Mac (and I’m Linux!)
by Julie 24 Dec '08

24 Dec '08

HAPPY HOLIDAYS, Y'ALL! Hello, I’m PC and I’m Mac (and I’m Linux!) http://blogs.techrepublic.com.com/opensource/?p=314&tag=nl.e011 Julie

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG